Scivo's SQN-30 is a high density edge QAM modulator for Video-On-Demand, unicast and broadcast. It adopts the multiplexing core in view of the optimize of VOD and actualize GbE and fiber access, de-jittering, router, multiplexing, QAM modulation and UHF up-conversion and so on functions which is based on Gigabit Ethernet switching technique.

It supports the applications of VOD, broadcasting, data services and provides the solution of high density, facility and cost-saving for the digital television operators who develop the service of VOD. SQN-30 supports for 8-24 QAM channels, which can sufficiently utilize the bandwidth of the Gigabit Ethernet. SQN-30 is easy to update and maintain with the RF module easy to inert and pull out.

• VOD / SVOD

• HDTV broadcast

• Game or data services broadcast

• Program broadcast

• DTV broadcast

Input:

• Gigabit Ethernet: two SFP and one RJ-45 (IEEE802.ab andIEEE802.3z)

• SFP interface one and one backup

• Support payload rate up to 960 Mbps (MPEG Transport Stream packet)

• Support IP/UDP, unicast and multicast

• Removal of Jitter

• Support MPEG-2 SPTS or MPTS

Control:

• Ethernet RJ-45, 10/100 Base-T

• WEB browser control

• SNMP management interface

• Protocol: HTTP, SNMP, HTML

Outputs:

• RF: one to six F-type, 75 Ohm

• Each RF port output 4 adjacent QAM channel

• QAM coding: ITU-T J.83 Annex A (DVB-C)

• QAM constellation: 16/64/256 QAM

• Frequency range: 50-860 MHz

• Frequency step: 100 KHz

• Frequency accuracy: 12 ppm

• Symbol rate: 5-7 MS/s (MAX)

• RF level: 80-110 dBmV

• MER≥40 dB

• BER<10e-9

• Reflected loss>13 dB